Double Sided Tape 1” X 25yd Aerovac 202034

GRP-ATRH10TAN

DOUBLE SIDED TAPE 1” X 25YD

Sealant tapes are used in the composite manufacturing process during vacuum bagging applications. These help create an airtight seal on the bag to ensure the best possible results from the curing procedure.  

The infusion process is a manufacturing technique used in open tool composite production. Reinforcement materials are laid up dry and several consumable products are placed on top; usually a peel ply, release film, flow media and vacuum bagging film (see diagram below) then vacuum is applied for part consolidation.

When the tool is closed (sealed by a vacuum bag) and all the air has been evacuated from the dry lay-up, the resin is transferred through the bag into the laminate, distributed by a channel or lining/mesh.  

Under pressure, the resin, allowed to breathe in an open vessel, is fed through the vacuum bag using plastic tubing and distributed over the entire surface of the reinforcement material utilizing a combination of porous channels and a distribution medium/mesh.